Choose Engineering Blueprint

Only the selected topology is displayed. This keeps the installation drawing large, clean and easy to print.

Engineering Blueprint Inputs

System Type

Source Configuration

Source Priority / Operating Strategy

Phase

AC Voltage (V)

Inverter Output (kW)

Module Power (W)

Module Voc (V)

Module Vmp (V)

Module Isc (A)

Module Imp (A)

Total Modules

Modules / String

Parallel Strings

Inverter Max DC Voltage (V)

MPPT Min Voltage (V)

MPPT Max Voltage (V)

Max MPPT Input Current (A)

Number of MPPT InputsEnter the actual inverter MPPT count.

Max Strings per MPPTHow many parallel strings will share one MPPT.

Module Voc Temp Coefficient (%/°C)Use the module datasheet value. Leave 0 if not yet verified.

Minimum Design Temperature (°C)Use the site/design minimum temperature, not current weather.

Battery Voltage (V)

Battery Capacity (kWh)

Inverter Efficiency (%)

Generator / ATS Override

Country / Region

Project / Client

Site

Drawing Revision

Engineering validation pending

Enter or confirm project values, then generate the blueprint.

COUNTVOLTAGEMPPTCURRENT

Engineering input required: final string design needs actual module temperature coefficients and minimum site temperature. Cable sizes, OCPD interrupting ratings, ATS, SPD, earthing and equipment limits require final verification before construction.

Tip: Use the separate On-Grid, Off-Grid, or Hybrid view for a cleaner installation reference. Print output is fixed to four A3 landscape engineering sheets.

E-01 — SYSTEM SINGLE-LINE & PROTECTION DIAGRAM

ADWORKS Engineering Blueprint

Calculated Design Summary

Equipment Preview Legend

PV Module	Generic realistic solar-module illustration	Inverter / PCE	Generic wall-mounted inverter preview
Battery	Generic LiFePO₄ cabinet / rack preview	Protection	Generic breaker / OCPD / disconnect preview
Combiner / SPD	Generic array combiner and surge-protection preview	ATS / DB	Generic transfer switch and distribution-board preview

Equipment illustrations are visual installation references only and do not represent a specific manufacturer or exact product model.

E-02 — PROTECTION, ATS & CABLE SCHEDULE

Preliminary device schedule for engineering review

Protection Schedule

ID	Circuit	Calculated Current	Preliminary Protection Class	Required Verification

Cable / Conductor Schedule

Circuit	Design Current	Preliminary Conductor	Installation / Verification Notes

Choose Engineering Blueprint

Engineering Blueprint Inputs

E-01 — SYSTEM SINGLE-LINE & PROTECTION DIAGRAM

Calculated Design Summary

Equipment Preview Legend

E-02 — PROTECTION, ATS & CABLE SCHEDULE

Protection Schedule

Cable / Conductor Schedule

Engineering Notes

E-03 — PV ROOF LAYOUT, STRING WIRING & BONDING

PV String Validation

E-04 — BATTERY / INVERTER / ATS / GROUNDING DETAIL

Battery & Transfer Summary